Diva pendant light was inspired by natural phenomena, modern statuary and contemporary architecture. As the name suggests, Diva’s unique and distinctive shape resembles a stylish and elegant lady that draws attention with its presence and stands out from the rest.
Note: some parts of our products are made by hand, therefore colours, shapes and finishes may vary slightly. We do our best to minimize these differences.
Aluminium: The outer shade of the pendant light is made of anodised, high quality aluminium tubes that provide a beautiful, glossy surface finish, yet allow the structure to remain lightweight.
Polyamide: Selective Laser Sintering is the 3D printing technology, that suits best our unique products. The SLS printed plastic ring enables the metal poles to create a special sequence and form the final shape of this pendant.
Glass: The shape of the integrated internal white glass follows the main shape of the poles. With the LED bulb inside, it provides stray light sideways and more concentrated light downwards.
Steel: Ceiling cover, white powder coated.
E27 socket, LED only, max 20 W
Delivered with a LED bulb (Osram, Phillips, Inesa or similar) E27, 11 W, 1055 lumen, 4000 K, cold white, non-dimmable, may vary). Warm white 2700-3000K available on request, however we still recommend cold white.
The use of special bulbs such as halogen, mirror or 12 V bulbs in Loomiosa light fixtures is prohibited, due to overheating.
150 cm, textile cable, ceiling plug/connector, ceiling cover.
Other lengths available on request.
Ingress Protection IP20 (Protected against solid foreign matter with a diameter starting at 12.5 mm, no water protection)
IEC Protection Class II
The pendant is delivered partially assembled. Final assembly is required according to the manual included in the pack. Assembly duration: 30-60min.
Wipe with a soft, dry cloth.
Estimated delivery: 6-10 weeks (depending on colour)